Qfinder Pro is a QNAP utility that enables you to quickly search and manage your NAS. The storage controller is not powered onĬonnecting to the ES NAS with Qfinder Pro.The storage controller has failed over to the other storage controller.Orange= The storage controller has taken over from the other storage controller The storage controller is not powered on.įlashing orange= Performing takeover or undergoing giveback.Off = One or more of the following conditions exist: The left and right digits represent the left Storage Controller (SCB) and the right Storage Controller (SCA) respectively. The two-digit number displays the state of the ES NAS power on process. There are two sets of LEDs, one for each storage controller. Start-up is finished when the left three of the four LEDs on the rear of the ES NAS turn green. All storage and management services are disabled while the ES NAS is powering on. The LEDs on the rear of the ES NAS and the LCD status display on the left front panel can both be used to check the status of power on. System start-up will take from 10 to 15 minutes, depending on the number of disks and the devices connected to the ES NAS. Note: To ensure power availability, installing two power supplies each connected with a separate power cable is recommended. Power on the ES NAS by pressing the power-on button on the left front panel. Then open a web browser and enter the default QES IP: 169.254.100.100. In an environment without DHCP, connect a PC directly to a NAS management port. Management ports (shown as red in the diagram below) are for managing the NAS via QES desktop.Data ports (shown as blue in the diagram below) are used for accessing data stored on the NAS, using protocols like iSCSI, NFS, and CIFS.The ES NAS has two types of network ports: The System may have problems or errors if disks not on the list are installed: : Check the compatibility link below for compatible disks. When using a mixture of SSDs and HDDs, installing the SSDs into drive bays 1 to 4 is recommended. It also means that the disks used for data storage can be easily migrated to another NAS. This setup prevents data storage operations interfering with the basic operation of the NAS system. The ES NAS will use drive bays 1 to 4 to store the system configuration, QNAP recommends drive bays 5 to 16 for data storage. This configuration is suitable for storing cold data that is not accessed frequently, and for applications that require sequential data access, such as video editing and surveillance. All HDD: Using all hard disk drives offers the best price and capacity.This configuration is especially suitable for virtual desktop infrastructure (VDI) and web servers. In additional to high IOPs, the ES NAS also supports creating an SSD read cache to further increase storage performance. Hybrid: The ES NAS allows you to mix SSDs and HDDs in one storage system, to help balance cost and performance.All SSD: SSDs are the best choice for I/O intensive workloads and business-critical storage.The ES NAS series supports the following disk drive configurations: The ES NAS natively supports Serial Attached SCSI (SAS) drives. Both 3.5 inch and 2.5 inch drives can be installed. The ES NAS series can accommodate solid-state drives (SSD), and traditional magnetic disk drives (HDD). Open the “Quick Installation Guide” link below and follow the steps to install the following basic hardware: Installation and Configuration Basic Hardware Installation Secured login and multi-factor authentication.Support Milestone Surveillance Platform.NAS Smart Surveillance System Solutions.NDR Solutions against Targeted Ransomware.Software-defined Platform Total Solution.Support Platform9’s Managed OpenStack Solution.Veeam-Ready and Virtualization Certifications.Management center for device and user permission.Disaster Recovery Solution Exclusive for ZFS NAS.With Linux and ZFS, QuTS hero supports advanced data reduction technologies for further driving down costs and increasing reliablility of SSD (all-flash) storage. QuTS hero is the operating system for high-end and enterprise QNAP NAS models. WIth Linux and ext4, QTS enables reliable storage for everyone with versatile value-added features and apps, such as snapshots, Plex media servers, and easy access of your personal cloud. With Linux and ZFS, QuTS hero supports advanced data reduction technologies for further driving down costs and increasing reliablility of SSD (all-flash) storage.QTS is the operating system for entry- and mid-level QNAP NAS. QTS is the operating system for entry- and mid-level QNAP NAS.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |